Installation wire is designed for power line (rated voltage 380, 660 and 3000 V and 50 Hz frequency)connection of submersible electric motors long-working in artesian well waters under the pressure of:
- up to 70 MPa at ambient temperature from -40°С to +65°С (ВПВ model) and from -40°С to +80°С (ВПП model);
- not higher than 150 MPaat ambient temperature from -40°С to +80°С (ВППУmodel)
Wire models and their definitions shall correspond to the details given in the table below:
| Model | Definition |
| VPP | polyethylene insulated, in polyethylene sheath for the voltage of 380 and 660 V; |
| VPPU | the same, for the voltage of 3000 V, with thickened insulation (only 25 and 35 mm² conductor areas); |
| VPV | polyethylene insulated, in PVC sheath for the voltage of 380 and 660 V. |
CONDUCTOR: copper, stranded.
INSULATION: polyethylene
SHEATH: polyethylene(VPP, VPPU), PVC (VPV).
Manufacturing of ВПП and ВППУ models in single-layer insulating sheath of light-stabilized polyethylene is allowed.
NUMBER OF CONDUCTORS:1
CONDUCTORAREA, mm²:1.2; 1.5; 2.0;2.5;3;4;5;6;8;10;16; 25;35; 50;70;95.
Wires shall be resistant to the effect of high atmospheric pressure:
- for VPP, VPV models - 70 MPa;
- for VPPU model - 150 MPa.
Wires shall be resistant to the effect of high temperature:
- for VPV model - up to +65°С
- for VPP, VPPU models - up to +80°С
Wires shall be resistant to the effect of high temperatureup to -40°С
Sheath ultimate tensile strength is not less than 12.50 MPa.
Wiring shall be performed at ambient temperature not lower than -15°С(VPV model) and -15°С (VPP, VPPU model) withbend radius not less than ten wire diameters.
Operational life for VPP, VPV models - not less than 6 years; for VPPU model- not less than 3 years.
